Install Bathroom Faucet Cost in North Dakota (2026)
Average cost in North Dakota: $126 - $504 per each
A typical standard faucet with installation costs $126 - $504 in North Dakota
How North Dakota Compares
North Dakota is -16% below the national average for install bathroom faucet.
North Dakota Typical Cost
$126 - $504
National Average
$150 - $600
Average labor rate in North Dakota: $38/hour
North Dakota Notes
Oil regions fluctuate; winter construction limitations
State sales tax on materials: 5.00%
Calculate Your North Dakota Cost
Your Estimated Cost
$126 - $504
Based on 1 each in North Dakota
Prices updated March 2026
Cost Breakdown
What This Means
For 1 each in North Dakota, expect to pay $126-$504 with mid-range materials that balance quality and cost.
About $189 goes to materials and $110 covers labor. At $315 per each, your project is 16% below the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •DIY could save you $158, but budget extra time and factor in your skill level.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$95 - $378
-$94 (-30%)
Premium materials
Upgrade to high-end finishes
$170 - $680
+$82 (26%)
DIY installation
Do the work yourself (materials only)
$134 - $181
-$157 (-50%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Install Bathroom Faucet requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $315 quote—and what's not?
What's included in your $315 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4Will you pull the permit, or do I need to?
Will you pull the permit, or do I need to?
Why ask: Licensed contractors should handle permits for code compliance.
Red flag: Suggesting you skip the permit to "save money."
5What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Faucet Installation in North Dakota FAQs
How much does install bathroom faucet cost in North Dakota?
Install Bathroom Faucet in North Dakota costs $126 - $504 per each in 2026. For a typical standard faucet with installation, expect to pay $126 - $504. North Dakota is -16% below the national average.
Do I need a permit for install bathroom faucet in North Dakota?
Permits are generally not required for install bathroom faucet in North Dakota. Oil regions fluctuate; winter construction limitations. Always check with your local building department before starting work.
What is the average labor rate in North Dakota?
The average skilled trade labor rate in North Dakota is $38/hour in 2026. This is below the national average. Labor typically accounts for 35% of total install bathroom faucet costs.
Is North Dakota expensive for home improvements?
North Dakota is 16% less expensive than the national average for home improvement projects. Lower labor rates and competitive markets keep costs down.
How do I find a contractor for install bathroom faucet in North Dakota?
To find a reputable contractor in North Dakota: 1) Get 3+ quotes from licensed contractors, 2) Verify their North Dakota contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.