Install French Drain Cost in Iowa (2026)
Average cost in Iowa: $23 - $92 per linear foot
A typical foundation perimeter (75 lf) costs $1,725 - $6,900 in Iowa
How Iowa Compares
Iowa is -8% below the national average for install french drain.
Iowa Typical Cost
$1,725 - $6,900
National Average
$1,875 - $7,500
Average labor rate in Iowa: $40/hour
Iowa Notes
Consistent regulations; Des Moines metro slightly higher
State sales tax on materials: 6.00%
Calculate Your Iowa Cost
Your Estimated Cost
$1,725 - $6,900
Based on 75 linear foots in Iowa
Prices updated March 2026
Cost Breakdown
What This Means
For 75 linear foots in Iowa, expect to pay $1,725-$6,900 with mid-range materials that balance quality and cost.
About $1,510 goes to materials and $2,372 covers labor. At $58 per linear foot, your project is 8% below the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •DIY could save you $2,157, but budget extra time and factor in your skill level.
- •A smaller 53 linear foot project would run about $3,019.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$1,294 - $5,175
-$1,725 (-40%)
Premium materials
Upgrade to high-end finishes
$2,329 - $9,315
+$345 (8%)
Smaller (56 linear foots)
Reduce project scope by 25%
$1,288 - $5,152
-$1,737 (-40%)
Larger (94 linear foots)
Expand project scope by 25%
$2,162 - $8,648
+$11 (0%)
DIY installation
Do the work yourself (materials only)
$1,833 - $2,480
-$2,156 (-50%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Install French Drain requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $4,313 quote—and what's not?
What's included in your $4,313 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
French Drain in Iowa FAQs
How much does install french drain cost in Iowa?
Install French Drain in Iowa costs $23 - $92 per linear foot in 2026. For a typical foundation perimeter (75 lf), expect to pay $1,725 - $6,900. Iowa is -8% below the national average.
Do I need a permit for install french drain in Iowa?
Permits are rarely needed for install french drain in Iowa. Consistent regulations; Des Moines metro slightly higher. Always check with your local building department before starting work.
What is the average labor rate in Iowa?
The average skilled trade labor rate in Iowa is $40/hour in 2026. This is near the national average. Labor typically accounts for 55% of total install french drain costs.
Is Iowa expensive for home improvements?
Iowa is 8% less expensive than the national average for home improvement projects. Costs are moderate compared to other states.
How do I find a contractor for install french drain in Iowa?
To find a reputable contractor in Iowa: 1) Get 3+ quotes from licensed contractors, 2) Verify their Iowa contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.