Install Sump Pump Cost in Tennessee (2026)
Average cost in Tennessee: $736 - $2,760 per each
A typical submersible with battery backup costs $736 - $2,760 in Tennessee
How Tennessee Compares
Tennessee is -8% below the national average for install sump pump.
Tennessee Typical Cost
$736 - $2,760
National Average
$800 - $3,000
Average labor rate in Tennessee: $40/hour
Tennessee Notes
Nashville expensive; rural areas very affordable
State sales tax on materials: 7.00%
Calculate Your Tennessee Cost
Your Estimated Cost
$736 - $2,760
Based on 1 each in Tennessee
Prices updated March 2026
Cost Breakdown
What This Means
For 1 each in Tennessee, expect to pay $736-$2,760 with mid-range materials that balance quality and cost.
About $787 goes to materials and $699 covers labor. At $1,748 per each, your project is 8% below the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •DIY could save you $699, but budget extra time and factor in your skill level.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$552 - $2,070
-$713 (-41%)
Premium materials
Upgrade to high-end finishes
$994 - $3,726
+$115 (7%)
DIY installation
Do the work yourself (materials only)
$891 - $1,206
-$699 (-40%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Install Sump Pump requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $1,748 quote—and what's not?
What's included in your $1,748 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4Will you pull the permit, or do I need to?
Will you pull the permit, or do I need to?
Why ask: Licensed contractors should handle permits for code compliance.
Red flag: Suggesting you skip the permit to "save money."
5Who handles the permit application and inspection scheduling?
Who handles the permit application and inspection scheduling?
Why ask: Permits ensure work meets code and protect your home's resale value.
Red flag: Resistance to pulling permits or suggesting you "don't need one."
Show 1 more questions
6What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Sump Pump Installation Cost by City in Tennessee
| City | Cost Range (per each) | vs. National |
|---|---|---|
| Nashville | $840 - $3,150 | +5% |
| Memphis | $704 - $2,640 | -12% |
Sump Pump Installation in Tennessee FAQs
How much does install sump pump cost in Tennessee?
Install Sump Pump in Tennessee costs $736 - $2,760 per each in 2026. For a typical submersible with battery backup, expect to pay $736 - $2,760. Tennessee is -8% below the national average.
Do I need a permit for install sump pump in Tennessee?
Permits may be required depending on scope for install sump pump in Tennessee. Nashville expensive; rural areas very affordable. Always check with your local building department before starting work.
What is the average labor rate in Tennessee?
The average skilled trade labor rate in Tennessee is $40/hour in 2026. This is near the national average. Labor typically accounts for 40% of total install sump pump costs.
Is Tennessee expensive for home improvements?
Tennessee is 8% less expensive than the national average for home improvement projects. Costs are moderate compared to other states.
How do I find a contractor for install sump pump in Tennessee?
To find a reputable contractor in Tennessee: 1) Get 3+ quotes from licensed contractors, 2) Verify their Tennessee contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.