Retile Bathroom Cost in Montana (2026)
Average cost in Montana: $10 - $40 per square foot
A typical floor and tub surround (80 sq ft) costs $800 - $3,200 in Montana
How Montana Compares
Montana is Avg at the national average for retile bathroom.
Montana Typical Cost
$800 - $3,200
National Average
$800 - $3,200
Average labor rate in Montana: $42/hour
Montana Notes
Resort areas expensive; rural areas have limited contractors
State sales tax on materials: 0.00%
Calculate Your Montana Cost
Your Estimated Cost
$800 - $3,200
Based on 80 square foots in Montana
Prices updated March 2026
Cost Breakdown
What This Means
For 80 square foots in Montana, expect to pay $800-$3,200 with mid-range materials that balance quality and cost.
About $800 goes to materials and $1,000 covers labor. At $25 per square foot, your project is right at the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •DIY could save you $800, but budget extra time and factor in your skill level.
- •A smaller 56 square foot project would run about $1,400.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$600 - $2,400
-$680 (-34%)
Premium materials
Upgrade to high-end finishes
$1,080 - $4,320
+$376 (19%)
Smaller (60 square foots)
Reduce project scope by 25%
$600 - $2,400
-$680 (-34%)
Larger (100 square foots)
Expand project scope by 25%
$1,000 - $4,000
+$200 (10%)
DIY installation
Do the work yourself (materials only)
$1,020 - $1,380
-$800 (-40%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Retile Bathroom requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $2,000 quote—and what's not?
What's included in your $2,000 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4How do you handle unexpected issues like mold or water damage behind walls?
How do you handle unexpected issues like mold or water damage behind walls?
Why ask: Remodels often uncover hidden problems. Know the process upfront.
Red flag: Claims they "never encounter issues" or won't discuss change orders.
5What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Bathroom Tile Installation in Montana FAQs
How much does retile bathroom cost in Montana?
Retile Bathroom in Montana costs $10 - $40 per square foot in 2026. For a typical floor and tub surround (80 sq ft), expect to pay $800 - $3,200. Montana is Avg at the national average.
Do I need a permit for retile bathroom in Montana?
Permits are rarely needed for retile bathroom in Montana. Resort areas expensive; rural areas have limited contractors. Always check with your local building department before starting work.
What is the average labor rate in Montana?
The average skilled trade labor rate in Montana is $42/hour in 2026. This is near the national average. Labor typically accounts for 50% of total retile bathroom costs.
Is Montana expensive for home improvements?
Montana is about the same as the national average for home improvement projects. Costs are moderate compared to other states.
How do I find a contractor for retile bathroom in Montana?
To find a reputable contractor in Montana: 1) Get 3+ quotes from licensed contractors, 2) Verify their Montana contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.