Retile Bathroom Cost in Wyoming (2026)
Average cost in Wyoming: $8 - $34 per square foot
A typical floor and tub surround (80 sq ft) costs $672 - $2,688 in Wyoming
How Wyoming Compares
Wyoming is -16% below the national average for retile bathroom.
Wyoming Typical Cost
$672 - $2,688
National Average
$800 - $3,200
Average labor rate in Wyoming: $40/hour
Wyoming Notes
Limited contractors; Jackson Hole very expensive
State sales tax on materials: 4.00%
Calculate Your Wyoming Cost
Your Estimated Cost
$672 - $2,688
Based on 80 square foots in Wyoming
Prices updated March 2026
Cost Breakdown
What This Means
For 80 square foots in Wyoming, expect to pay $672-$2,688 with mid-range materials that balance quality and cost.
About $672 goes to materials and $840 covers labor. At $21 per square foot, your project is 16% below the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •DIY could save you $672, but budget extra time and factor in your skill level.
- •A smaller 56 square foot project would run about $1,176.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$504 - $2,016
-$571 (-34%)
Premium materials
Upgrade to high-end finishes
$907 - $3,629
+$316 (19%)
Smaller (60 square foots)
Reduce project scope by 25%
$504 - $2,016
-$571 (-34%)
Larger (100 square foots)
Expand project scope by 25%
$840 - $3,360
+$168 (10%)
DIY installation
Do the work yourself (materials only)
$857 - $1,159
-$672 (-40%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Retile Bathroom requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $1,680 quote—and what's not?
What's included in your $1,680 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4How do you handle unexpected issues like mold or water damage behind walls?
How do you handle unexpected issues like mold or water damage behind walls?
Why ask: Remodels often uncover hidden problems. Know the process upfront.
Red flag: Claims they "never encounter issues" or won't discuss change orders.
5What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Bathroom Tile Installation in Wyoming FAQs
How much does retile bathroom cost in Wyoming?
Retile Bathroom in Wyoming costs $8 - $34 per square foot in 2026. For a typical floor and tub surround (80 sq ft), expect to pay $672 - $2,688. Wyoming is -16% below the national average.
Do I need a permit for retile bathroom in Wyoming?
Permits are rarely needed for retile bathroom in Wyoming. Limited contractors; Jackson Hole very expensive. Always check with your local building department before starting work.
What is the average labor rate in Wyoming?
The average skilled trade labor rate in Wyoming is $40/hour in 2026. This is near the national average. Labor typically accounts for 50% of total retile bathroom costs.
Is Wyoming expensive for home improvements?
Wyoming is 16% less expensive than the national average for home improvement projects. Lower labor rates and competitive markets keep costs down.
How do I find a contractor for retile bathroom in Wyoming?
To find a reputable contractor in Wyoming: 1) Get 3+ quotes from licensed contractors, 2) Verify their Wyoming contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.