Seal Driveway Cost in Maryland (2026)
Average cost in Maryland: $0 - $1 per square foot
A typical double car driveway costs $126 - $420 in Maryland
How Maryland Compares
Maryland is +20% above the national average for seal driveway.
Maryland Typical Cost
$126 - $420
National Average
$105 - $350
Average labor rate in Maryland: $52/hour
Maryland Notes
DC-area has higher costs; Chesapeake Bay environmental rules
State sales tax on materials: 6.00%
Calculate Your Maryland Cost
Your Estimated Cost
$0 - $840
Based on 700 square foots in Maryland
Prices updated March 2026
Cost Breakdown
What This Means
For 700 square foots in Maryland, expect to pay $0-$840 with mid-range materials that balance quality and cost.
About $189 goes to materials and $210 covers labor. At $1 per square foot, your project is 20% above the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •Maryland runs high—consider getting quotes from neighboring areas if feasible.
- •DIY could save you $273, but budget extra time and factor in your skill level.
- •A smaller 490 square foot project would run about $294.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$94 - $315
-$262 (-62%)
Premium materials
Upgrade to high-end finishes
$170 - $567
-$136 (-32%)
Smaller (525 square foots)
Reduce project scope by 25%
$95 - $315
-$262 (-62%)
Larger (875 square foots)
Expand project scope by 25%
$158 - $525
-$157 (-37%)
DIY installation
Do the work yourself (materials only)
$125 - $169
-$273 (-65%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Seal Driveway requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $420 quote—and what's not?
What's included in your $420 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4What manufacturer warranty comes with the materials, and do you offer a workmanship warranty?
What manufacturer warranty comes with the materials, and do you offer a workmanship warranty?
Why ask: Material warranties alone don't cover installation errors.
Red flag: No workmanship warranty or only verbal guarantees.
5What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Driveway Sealing Cost by City in Maryland
| City | Cost Range (per square foot) | vs. National |
|---|---|---|
| Baltimore | $0 - $1 | +15% |
Driveway Sealing in Maryland FAQs
How much does seal driveway cost in Maryland?
Seal Driveway in Maryland costs $0 - $1 per square foot in 2026. For a typical double car driveway, expect to pay $126 - $420. Maryland is +20% above the national average.
Do I need a permit for seal driveway in Maryland?
Permits are generally not required for seal driveway in Maryland. DC-area has higher costs; Chesapeake Bay environmental rules. Always check with your local building department before starting work.
What is the average labor rate in Maryland?
The average skilled trade labor rate in Maryland is $52/hour in 2026. This is above the national average. Labor typically accounts for 50% of total seal driveway costs.
Is Maryland expensive for home improvements?
Maryland is +20% more expensive than the national average for home improvement projects. High labor costs and material prices drive up costs.
How do I find a contractor for seal driveway in Maryland?
To find a reputable contractor in Maryland: 1) Get 3+ quotes from licensed contractors, 2) Verify their Maryland contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.